Looks like we will be rolling the hull over this Sunday. David, who originally came up with the concept of this design and who initially started building the hull is planning on being here to help roll it over and check out my progress on his boat. I'm thinking it should go pretty easy. It still weighs almost nothing so I think with 4 guys we can lift it off of the strongback and carry it out into the field. We will then pull off the male forms and replace them with female cradles that I built today. The roll over will be done in the field. Then we will carry it back into the shop and set in in the cradles. We will then do any adjusting to make sure it is straight and level. After this we will sit back and admire the fine lines of this vessel as it sits in a proper boatlike position.